Need help\advice on connecting GenX

[mibaro]

The GenX PCX (which is this years equivalent of Mak4) is my first external pump. Any advice on connecting it, or is it just put on the 3/4 threads, and attach flex hose with clamps.
-Do I use plumber thread on the 3/4 threaded joint so it doesn't leak?
-
--(with my submersable mag12 I didn't have to worry if the joint dripped).

Michael

[ajx22]

Michael,

Just connect it buddy - they are really a very easy to use/plumb pump.

If you're using flex hose - then you are bang-on. I would use a bit of plumbers (Teflon) tape to ensure a leak-free fit - and just tighten the connections to the 3/4" thread HAND TIGHT - then a small turn with a wrench just to ensure a snug fit. Do not over-tighten - or you may crack the housing.

You're off to the races!! :D

BTW...Great pump you have. Congrat's!

HTH

[neemo]

Another suggestion:

If you want to make it easier to service or replace the pump in the future, you caould also put a true union shut-off valve on each end. That way you can easily dissconnect the pump without having to worry about water syphoning through the hose ends.